BFT RADIUS LED AC A R1 230V Flashing Light with Built-in Antenna
BFT RADIUS LED AC A R1 230V Flashing Light with Built-in Antenna

Click on the image to enlarge it

BFT

Click here for more BFT

BFT RADIUS LED AC A R1 230V Flashing Light with Built-in Antenna


The BFT RADIUS LED AC A R1 is a 230V LED warning light that flashes while a barrier or gate moves, with a 433.92 MHz receiver antenna built into the housing. It is the light included in the MOOVIKIT kits.

====

The BFT RADIUS LED AC A R1 is a warning light that flashes for the whole time a barrier is moving, so drivers and pedestrians can see the arm is about to lift or drop. It runs on 230V, carries a 433.92 MHz receiver antenna inside, and has an IP44 body.

RADIUS LED AC A R1 specifications

  • Supply: 230V.
  • Light source: LED, using about 80% less energy than an incandescent bulb.
  • Antenna: built in, 433.92 MHz.
  • Protection: IP44.

Mounting and typical use

Mount it on a flat surface such as the top of a gate pillar, or on a wall with the dedicated bracket. It is included in the MOOVIKIT30, MOOVIKIT50 and MOOVIKIT60 kits. The flashing matters most at entrances where pedestrians and children walk past.

AC A R1 or BT A R1?

The difference is voltage: the AC A R1 runs on 230V, the BT A R1 on 24V, and both have the antenna built in. Match the voltage your control board supplies to the warning light. R0 versions of the same light also exist.

Frequently Asked Questions

What does the built-in antenna do?

It is a 433.92 MHz receiver antenna inside the light, so the control board needs no separate external antenna.

Is it suitable outdoors?

It is rated IP44 and is normally mounted on top of the entrance pillar.

Specifications

  • Model: RADIUS LED AC A R1
  • Order code: 2607538
  • Power supply: 230V
  • Light source: LED
  • Antenna: Built-in receiver antenna, 433.92 MHz
  • Protection rating: IP44
  • Mounting: Surface (pillar or column), or wall with a dedicated bracket

Features

  • 230V supply: choose it when the control board's warning-light output is 230V.
  • Built-in 433.92 MHz receiver antenna: no separate external antenna on the gate.
  • LED source using about 80% less energy than an incandescent bulb: longer life, fewer lamp changes.
  • IP44 body for surface or pillar mounting, or wall mounting with an accessory: fits compound and villa gate posts.
Read more
SKU : BFT-RADIUS-LED-AC-A-R1

382.95

VAT included

Drag & drop file

Browse


The BFT RADIUS LED AC A R1 is a 230V LED warning light that flashes while a barrier or gate moves, with a 433.92 MHz receiver antenna built into the housing. It is the light included in the MOOVIKIT kits.

====

The BFT RADIUS LED AC A R1 is a warning light that flashes for the whole time a barrier is moving, so drivers and pedestrians can see the arm is about to lift or drop. It runs on 230V, carries a 433.92 MHz receiver antenna inside, and has an IP44 body.

RADIUS LED AC A R1 specifications

  • Supply: 230V.
  • Light source: LED, using about 80% less energy than an incandescent bulb.
  • Antenna: built in, 433.92 MHz.
  • Protection: IP44.

Mounting and typical use

Mount it on a flat surface such as the top of a gate pillar, or on a wall with the dedicated bracket. It is included in the MOOVIKIT30, MOOVIKIT50 and MOOVIKIT60 kits. The flashing matters most at entrances where pedestrians and children walk past.

AC A R1 or BT A R1?

The difference is voltage: the AC A R1 runs on 230V, the BT A R1 on 24V, and both have the antenna built in. Match the voltage your control board supplies to the warning light. R0 versions of the same light also exist.

Frequently Asked Questions

What does the built-in antenna do?

It is a 433.92 MHz receiver antenna inside the light, so the control board needs no separate external antenna.

Is it suitable outdoors?

It is rated IP44 and is normally mounted on top of the entrance pillar.

Specifications

  • Model: RADIUS LED AC A R1
  • Order code: 2607538
  • Power supply: 230V
  • Light source: LED
  • Antenna: Built-in receiver antenna, 433.92 MHz
  • Protection rating: IP44
  • Mounting: Surface (pillar or column), or wall with a dedicated bracket

Features

  • 230V supply: choose it when the control board's warning-light output is 230V.
  • Built-in 433.92 MHz receiver antenna: no separate external antenna on the gate.
  • LED source using about 80% less energy than an incandescent bulb: longer life, fewer lamp changes.
  • IP44 body for surface or pillar mounting, or wall mounting with an accessory: fits compound and villa gate posts.

See more View less