The DSPPA DSP8011 is a round frameless speaker for ceilings or walls, with 94dB sensitivity, 104dB maximum SPL, and 10W on a 100V line (5W on 70V). It suits tall halls, malls and long corridors where you want more level from the same amplifier power.
====
Sound loses energy fast under a high ceiling, and that is where the DSPPA DSP8011 earns its place with 94dB sensitivity. It is a round frameless speaker that goes into a ceiling or a wall, delivers 10W on a 100V line and reaches 104dB maximum SPL. Wedding halls, mall concourses and long corridors are typical homes for it.
DSPPA DSP8011 specifications
From DSPPA's official product page and datasheet:
- Power: 10W on a 100V line, 5W on a 70V line.
- Sensitivity: 94dB ±2dB at 1W, 1m.
- Maximum SPL: 104dB ±2dB at 1m.
- Frequency response: 60Hz to 18kHz.
- Mounting hole: 208-215mm; weight 0.8kg.
Why 94dB sensitivity matters
Sensitivity tells you how loud a speaker plays from 1W. Every 3dB is roughly equal to doubling amplifier power, so 94dB on the DSP8011 against 90dB on the DSP7011 is a real gain in big spaces. In a wedding hall or a mall atrium with a tall ceiling, you get clear coverage without pushing the amplifier to its limit.
One speaker for ceilings and walls
DSPPA designed the DSP8011 for both in-ceiling and in-wall installation, with movable clips that make fitting easier. That helps on mixed sites: gypsum ceilings in the corridors, wall mounting in a hall with exposed concrete or a decorative ceiling you would rather not cut. The engineering-plastic body resists warping and fading, and the damped cone edge extends driver life and keeps the sound clean.
Where it works in Saudi Arabia
- Wedding and event halls: speeches and music from speakers hidden in the ceiling or walls.
- Malls and commercial centres: background music and announcements along high concourses.
- Large mosques: prayer-hall coverage under high ceilings.
- Schools and universities: school theatres and activity halls.
Wiring and amplifier matching
The speaker runs on 70V and 100V lines and has several terminals for different setups, so pair it with a 100V-capable amplifier. Twenty-five speakers at 10W make 250W, so a 300W amplifier gives comfortable headroom. On a 70V line each speaker draws 5W, so size the load on that basis.
Space the speakers evenly. A higher ceiling spreads each speaker over a wider area but at a lower level, which is exactly where the extra sensitivity pays off. At 0.8kg, less than half the weight of the DSP703, it will not strain gypsum boards.
DSP8011, DSP7011 or DSP703?
The DSP8011 has the highest sensitivity (94dB) and the highest output (104dB) of the three, and it is the only one rated for wall mounting, with the largest 208-215mm hole. The DSP7011 gives the same 10W on 100V but starts at 120Hz, peaks at 92dB and fits a 165-170mm hole. The DSP703 is a 20W coaxial speaker, but its sensitivity is 88dB and it weighs 1.8kg. Choose the DSP8011 for tall ceilings and wide halls.
Frequently Asked Questions
Can the DSP8011 be installed in a wall?
Yes. DSPPA designed it for both ceiling and in-wall installation, fixed with movable clips in a 208-215mm hole.
What power does it draw on a 70V line?
5W on 70V and 10W on 100V, according to the official datasheet.
What does 94dB sensitivity give me?
More volume from the same amplifier power, which matters in large halls and under high ceilings.
Specifications
- Model: DSP8011
- Type: Frameless round in-ceiling / in-wall loudspeaker
- Rated voltage / power: 70V: 5W; 100V: 10W
- Sensitivity (1W/1m): 94dB ±2dB
- Max SPL (1m): 104dB ±2dB
- Frequency response: 60Hz - 18kHz
- Mounting hole: Φ208 - 215mm
- Weight: 0.8kg
- Material: Engineering plastic
- Mounting: In-ceiling or in-wall, movable clips
Features
- 94dB sensitivity: higher than the DSP7011 (90dB) and DSP703 (88dB), so you get more volume per watt.
- 104dB max SPL at 1m: enough headroom for large halls and high ceilings.
- 60Hz-18kHz frequency response: clear speech plus a solid low end for music.
- 10W on 100V and 5W on 70V: run a long line of speakers from one amplifier.
- Ceiling or wall mounting with movable clips, 0.8kg: one model for different spots in the same project.