The Fanvil VIK-01 pairs a 7-inch i504W touchscreen indoor station with an i60 door phone that has a 2 MP camera and IP65 housing, plus door release from the screen or a mobile app. It suits villas and istirahas that want a complete IP video intercom in one order.
====
The Fanvil VIK-01 is a ready-made villa intercom kit: a 7-inch i504W touchscreen indoor station, an i60 video door phone with a 2 MP camera, and the Fanvil Link mobile app. You see and talk to whoever is at the gate, then open the door from the screen or from your phone. Fanvil describes setup as plug-and-play, needing only power and network connections.
What comes in the Fanvil VIK-01 kit
Both devices are also sold separately:
- i504W indoor station: 7-inch IPS capacitive touchscreen at 1024×600, 2 W speaker, dual-band 2.4 GHz and 5 GHz Wi-Fi.
- i60 door phone: 2 MP HDR camera with a 140° field of view, one speed-dial button, IP65 housing for outdoor mounting.
- Fanvil Link app for remote door release.
Five ways to open the door
The i60 has a built-in relay (NC, COM, NO) that drives your existing electric strike or magnetic lock. The lock itself is not part of the kit. Once wired, you can release the door by:
- Tapping the door button on the i504W during a call.
- Using the Fanvil Link app, including Bluetooth (BLE) door release up close.
- Presenting a 13.56 MHz IC card.
- Sending a DTMF code from a phone during the call.
- Pressing an indoor exit switch wired to the door phone.
Clear video in sun and at night
The i60 uses a 1/2.9-inch CMOS sensor with a 140° diagonal view (100° horizontal, 57° vertical) and works down to 0.1 lux with IR assist. HDR helps when a visitor stands against strong afternoon sun. It also has motion detection, a tamper alarm and a TF card slot.
Power and installation
Both units take 802.3af PoE, so one cable from a PoE switch powers each device. Either can also run from a 12 V / 1 A adapter. Thanks to Wi-Fi, the i504W can hang in a majlis with no network cable, powered by the adapter. The i60 measures just 130×50×30 mm, fits a narrow door frame and mounts on the wall with a rain cover.
Where it fits in Saudi homes
- One- or two-storey villas: screen in the hall, door phone at the street gate.
- Istirahas and farms: let in a worker or guest from the app.
- Annexes and home offices with their own entrance.
The i504W also has 8 alarm inputs and a doorbell input for door and window sensors.
Works with SIP phone systems and cameras
Both devices speak SIP 2.0 over UDP, TCP or TLS. Register them on any SIP-based IP PBX and a gate call can ring office desk phones too. The i504W displays live feeds from linked IP cameras, and the i60 supports ONVIF Profile S, so an NVR can record it.
VIK-01 kit or i504W plus i60K?
The only difference is the door unit. The i60K adds a numeric keypad with PIN entry and measures 149.7×70.7×30 mm; everything else matches the i60. If staff need a door code, buy the i504W and i60K separately. If cards and the app are enough, the VIK-01 gets both units in a single order.
Frequently Asked Questions
Can I open the door from my phone with the VIK-01?
Yes. Fanvil lists remote door release through the Fanvil Link app, and the i60 also supports Bluetooth (BLE) door opening.
Do I need a PoE switch?
Not necessarily. Both units support 802.3af PoE but also run from a 12 V / 1 A adapter, and the i504W can join your network over Wi-Fi.
Is an electric lock included?
No. The kit is the i504W screen and the i60 door phone. The i60 has a built-in relay (NC/COM/NO) for the electric strike or magnetic lock of your choice.
Specifications
- Model: VIK-01
- Kit components: i504W SIP indoor station + i60 video door phone + Fanvil Link app
- Application: Villas and single-family homes
- i504W display: 7-inch IPS capacitive touchscreen, 1024×600
- i504W housing: ABS
- i504W speaker: 2 W, full-duplex hands-free with AEC
- i504W Wi-Fi: Dual-band 2.4 GHz and 5 GHz
- i504W interfaces: 8 alarm inputs, 1 short-circuit output, 1 doorbell input, 1 RS-485 (reserved)
- i504W network: 1× RJ45 10/100 Mbps
- i504W power: 12 VDC 1 A or PoE 802.3af
- i504W consumption: PoE 3.65–6.64 W; adapter 2.71–5.53 W
- i504W protocol: SIP 2.0 over UDP/TCP/TLS
- i504W audio codecs: G.711a/u, G.723.1, G.726, G.729AB, iLBC, G.722, Opus
- i504W video decoding: H.264, H.265 (optional), up to 1080p
- i504W DTMF: In-band, RFC2833, SIP INFO
- i504W functions: Live view of linked IP cameras, remote door opening, messages, custom ringtones, scheduled DND
- i504W dimensions: 177.38×113.99×22.5 mm
- i504W gross weight: 0.45 kg
- i504W mounting: Wall mount
- i504W operating temp / humidity: -10 to 50°C, 10–90% RH
- i60 camera: 2 MP HDR, 1/2.9-inch CMOS, IR supported
- i60 field of view: 140° (H 100°, V 57°)
- i60 minimum illumination: 0.1 lux with IR
- i60 video codec: H.264 (Baseline, Main Profile)
- i60 keypad: 1 speed-dial button
- i60 SIP lines: 2
- i60 door opening methods: DTMF, IC card, remote, BLE, indoor switch
- i60 cards: 13.56 MHz
- i60 interfaces: Built-in relay (NC/COM/NO), Wiegand in/out 26/34-bit, 2 short-circuit inputs (DOORA, DOORB), TF card slot
- i60 network: RJ45 10/100 Mbps
- i60 power: 12 VDC 1 A or PoE 802.3af Class 3
- i60 consumption: PoE 1.63–6.93 W; adapter 1.51–6.16 W
- i60 protocols: SIP 2.0 over UDP/TCP/TLS, ONVIF Profile S, open API
- i60 functions: Motion detection, tamper alarm, full-duplex HD audio
- i60 housing: ABS+PC, black panel, gunmetal housing
- i60 rating: IP65
- i60 dimensions: 130×50×30 mm
- i60 mounting: Wall mount with rain cover
Features
- 7-inch 1024×600 touchscreen with 2.4/5 GHz Wi-Fi: mount it in the majlis or hall even where no network cable runs.
- 2 MP HDR camera, 140° view, 0.1 lux with IR: faces stay clear in harsh midday sun and after dark.
- 5 ways to open the door, including 13.56 MHz cards and BLE: every family member or worker gets a method that suits them.
- 802.3af PoE on both units: one cable per device carries power and data from the switch.
- IP65 door phone measuring 130×50×30 mm: survives the street gate and fits slim door frames.