The Yeastar P560 starts at 100 users and 30 concurrent calls and grows to 200 users and 60 calls with a single D30 module. It is built for companies, hotels and medical centers that need an E1 line or a mix of landlines and mobile SIMs.
====
The Yeastar P560 is built for an organization that starts at around 100 staff and plans to reach 200. Out of the box it runs 100 users and 30 concurrent calls, and a single D30 module installed inside the chassis doubles both figures. It is also the smallest P-Series appliance with an E1 option, which makes it the usual choice for sites with a digital trunk from their carrier or a legacy system running on E1.
Yeastar P560 capacity before and after expansion
You keep the same box as the team grows. The D30 is a DSP module that slots into a dedicated D-Slot and adds 100 users and 30 calls.
- Without D30: 100 users, 30 concurrent calls.
- With D30: 200 users, 60 concurrent calls.
- Up to 8 FXS, 8 FXO/BRI, 4 3G/4G ports and one E1/T1/J1 port, depending on the expansion board.
One expansion slot: EX08 or EX30?
This is the key buying decision. The P560 has one expansion slot, and it takes one of two boards:
- EX08: holds up to 4 telephony modules and provides 8 RJ11 ports. Mix S2 for analog handsets, O2 for landlines, B2 for BRI or 4G LTE modules for STC, Mobily and Zain SIMs.
- EX30: one E1/T1/J1 port for a high-capacity digital line.
Built-in storage and management
The rear panel has an SD slot and a USB port for recordings, voicemail and logs, plus an RS232 console for debugging. An NFC tag on the front lets you set network parameters from a phone. Rack brackets for a 19-inch cabinet are in the box.
Medical centers and companies in Saudi Arabia
- Medical centers: an extension per clinic and a queue for appointment calls.
- Companies with branches in Jeddah and Dammam: branch calls become internal extensions over the network.
Apps, integrations and security
Linkus runs on mobile, desktop and web. The PBX auto-provisions more than 500 IP phone models and integrates with Microsoft Teams and CRMs such as Salesforce, Bitrix24 and Microsoft Dynamics 365. Calls are encrypted with SRTP and TLS, logins support two-factor authentication, and the Appliance Edition supports Hot Standby with a second redundancy unit.
P560, P550 or P570?
The P550 covers up to 50 users with the same analog and cellular maximums, but has no E1 and no capacity upgrade. The P570 starts at 300 users and scales to 500, with two expansion slots and two E1 ports. Choose the P560 when your headcount sits between 50 and 200 or you need a single E1 line.
Frequently Asked Questions
How many users does the Yeastar P560 support?
100 users and 30 concurrent calls as standard, and 200 users with 60 calls after adding one D30 module.
Can I install both EX08 and EX30 in the P560?
No. The P560 has a single expansion slot that takes one board.
Where does the P560 store call recordings?
On an SD card or a USB flash drive; both slots are on the rear panel.
Specifications
- Model: P560
- Series: Yeastar P-Series Appliance Edition
- Users: 100 (up to 200 with 1× D30)
- Concurrent calls: 30 (up to 60 with 1× D30)
- Max FXS ports: 8
- Max FXO / BRI ports: 8
- Max 3G/4G ports: 4
- Max E1/T1/J1 ports: 1
- Expansion board slots: 1 (EX08 or EX30, one at a time)
- Telephony modules: Up to 4 on the EX08 board (S2, O2, B2, SO, GSM, 3G, 4G LTE)
- D30 DSP modules: Up to 1 in the D-Slot (adds 100 users and 30 calls)
- Network ports: 1× WAN, 1× LAN
- Storage: SD card slot + USB port (recordings, voicemail, logs)
- Other interfaces: RS232 console, NFC tag, reset button, power switch, protective earth, antenna socket
- LED indicators: System and Power
- Power: Supplied power cord
- Mounting: Desktop (4 rubber feet) or 19-inch rack
- Operating environment: Below 40°C per installation guide
- In the box: P560 unit, power cord, Ethernet cable, 2 rack-mount kits, grounding stud and nut, 4 rubber feet, quick installation guide
Features
- 100 to 200 users: one D30 module adds 100 users and 30 calls, for 60 concurrent calls in total.
- One expansion slot, two choices: an EX08 board for 8 analog/cellular ports or an EX30 board for one E1/T1/J1 line.
- Up to 8 FXS or FXO/BRI ports and 4 3G/4G ports: analog handsets, landlines and mobile SIMs in one system.
- SD slot and USB port: keep call recordings, voicemail and logs on local storage.
- RS232 console and NFC tag: quick network setup from a phone and direct access for system debugging.