The Yeastar TA810 takes up to 8 analog landlines and hands them to an on-site or cloud IP PBX as SIP trunks. It fits mid-size offices, small hotels and schools with more than four lines that want them all on one phone system.
====
The Yeastar TA810 is an 8-port FXO gateway that connects analog landlines to an IP PBX, whether that PBX sits in your server room or runs in the cloud. Landlines go in one side; SIP trunks come out the other. Your customers keep calling the same numbers, and the PBX decides which desk, department or mobile app rings.
Yeastar TA810 hardware at a glance
Each of the eight FXO ports accepts one landline, so a fully connected TA810 carries 8 outside calls at once. It joins the network through a single 10/100 Mbps LAN port and sits on a desk or hangs on a wall using the bundled stand.
- 8 RJ11 FXO ports.
- One 10/100 Mbps LAN port.
- SIP and IAX2 over UDP, TCP, TLS and SRTP.
- 7 codecs including G.711, G.722 and G.729A.
- T.30 fax support.
Landlines on a cloud PBX
Plenty of companies have moved their phone system to the cloud while their landlines stay physically in the office. Yeastar's official help center walks through registering the TA810 to P-Series Cloud Edition, where the eight lines appear as trunks on the hosted PBX. The same gateway also connects over a SIP trunk to an on-site appliance such as the P550 or P560. With OpenVPN, TLS and SRTP on board, the link between office and remote PBX can be secured.
Clear audio and accurate records
Analog lines can introduce echo and jitter once converted to IP. The TA810 handles this with G.168 echo cancellation, a dynamic jitter buffer and packet loss concealment. It detects when the far end answers and when a call ends, by busy tone or polarity reversal, so call durations in the CDR are accurate. Caller ID is passed through in BELL202, ETSI and DTMF formats.
Who buys the TA810 in KSA
- Mid-size companies in Dammam or Khobar with five to eight landlines to bring onto one PBX.
- Small hotels and serviced apartments in Makkah or Madinah running reception and booking lines.
- Private schools moving admin and student affairs lines to IP.
- Businesses that switched to a cloud PBX but want to keep their existing landlines.
Management and security
A web interface gives you call, system, hardware and debug logs, configuration backup and restore, and firmware upgrades over HTTP or TFTP. Yeastar PBXs can auto-provision the gateway. A firewall and IP blocklist protect it on the network. Yeastar lists interoperability with Asterisk and FreePBX and certification with Elastix. If the site still has an old analog PABX, you can connect its extensions to the gateway ports during the move to the new system.
TA810 vs TA410 vs TA1610
All three share the same firmware and feature set; what changes is line count. The TA410 has 4 ports, the TA810 has 8 in the same compact desk or wall format, and the TA1610 reaches 16 lines in a rack chassis with an RJ21 connector. Choose the TA810 when you have five to eight lines and no rack.
Frequently Asked Questions
Does the TA810 work with a Yeastar cloud PBX?
Yes. Yeastar publishes an official guide for registering the TA810 to P-Series Cloud Edition, with all eight lines appearing as trunks.
Can I connect only five lines now and add more later?
Yes. Each port works independently, so connect the lines you have today and use the spare ports as you add more.
Does the TA810 need a rack?
No. It sits on a desk or mounts on a wall with the stand included in the box.
Specifications
- Model: TA810
- Series: Yeastar TA Series FXO VoIP Gateways
- FXO ports: 8 × RJ11
- RJ21 ports: None
- LAN: 1 × 10/100 Mbps
- LED indicators: Power, Run, LAN, per-port FXO status
- Reset button: Hold 7 seconds to restore factory defaults
- Power: External power adapter (included), no power switch
- Protocols: SIP (RFC3261), IAX2
- Transport: UDP, TCP, TLS, SRTP
- Codecs: G.711 (A-law/μ-law), G.722, G.723, G.726, G.729A, GSM, ADPCM
- Voice capability: ITU-T G.168 echo cancellation, dynamic jitter buffer, VAD, CNG, PLC
- DTMF mode: RFC2833, SIP INFO, in-band
- Fax: T.30
- QoS: DiffServ, ToS, 802.1P/Q VLAN tagging
- Network: DHCP, DDNS, OpenVPN, PPPoE, static route, VLAN
- Network / management protocols: FTP, TFTP, HTTP, HTTPS, SSH
- Signaling: FXS Loop Start, FXS Kewl Start
- Caller ID: BELL202, ETSI (V23), NTT (V23-Japan), DTMF-based
- Disconnect methods: Busy tone, polarity reversal
- FXO connectivity: Programmable AC impedance, hangup detection, answer detection, caller ID detection
- Management: Web GUI, call detail records, system/hardware/debug logs, backup and restore, firmware upgrade via HTTP/TFTP, packet capture tool
- Security: Firewall, IP blocklist, attack alert
- Auto provisioning: PnP or DHCP provisioning by Yeastar PBX, TR-069
- Compatibility: Interoperable with Asterisk, Lync Server, FreePBX; certified with Elastix
- Operating temperature: 0°C to 40°C (32°F to 104°F)
- Storage temperature: -20°C to 65°C (-4°F to 149°F)
- Humidity: 10% to 90%, non-condensing
- Mounting: Desktop, or wall-mount using the stand
- In the box: TA810 unit, RJ45 Ethernet cable, stand, power adapter, quick installation guide
Features
- 8 RJ11 FXO ports: up to 8 simultaneous outside calls over your landlines.
- Documented cloud PBX setup: Yeastar's official guide registers the TA810 to P-Series Cloud Edition as 8 FXO trunks.
- SIP and IAX2 with TLS, SRTP and OpenVPN: link the gateway securely to a PBX at another site.
- G.168 echo cancellation plus answer and hangup detection: clearer audio and accurate call start and end times in the CDR.
- One 10/100 Mbps LAN port with desk or wall mounting: no rack needed.