Fanvil X301 vs X303 comes down to three things: the screen, the number of SIP accounts and line keys, and the speed of the PC port. The X4U sits above both for anyone who transfers calls all day. Each series also comes in P, G and W versions, and that letter changes how the phone connects and is powered. This guide compares the seven models Misbar stocks, using figures from Fanvil's official pages, and tells you which phone fits which desk.

Quick comparison: all seven models

In short: the X301P suits most staff desks, the X303P suits anyone handling more than one line, and the X4U is for the receptionist or secretary who transfers calls. Pick a G model when the PC sits behind the phone and needs gigabit, and a W model when no network cable reaches the desk.

Fanvil X301 vs X303: the 3 real differences

1. Screen: the X301 has a 2.3-inch backlit mono display, enough for caller ID and menus. The X303 has a 2.4-inch 320×240 colour screen, so names and line status read faster.
2. Accounts and line keys: the X301 has 2 SIP accounts; the X303 has 4, plus 3 LED line keys. One look at the keys tells you which line is ringing or on hold, which matters for sales and support staff who answer the company number and their direct line.
3. Key count: the X301 has 33 keys and the X303 has 36. The difference is those 3 line keys.

What both series share: 6-party local conferencing, HD audio with G.722 and Opus, a 1,000-entry phonebook, support for Poly and Jabra EHS wireless headsets, and L2TP and OpenVPN for branch phones.

What P, G and W mean

• P: two 10/100 Mbps ports with PoE. The lowest-cost version, fine when the PC connects directly or doesn't need more than 100 Mbps.
• G: two gigabit 10/100/1000 Mbps ports with PoE, so the PC behind the phone keeps full gigabit speed.
• W: built-in Wi-Fi on 2.4 and 5 GHz, no network cable needed. Note that the X301W runs on a 5V/1A adapter only, with no PoE, while the X303W runs on PoE or the adapter.

Fanvil X301 series: the two-account staff phone

The Fanvil X301P is the phone for fitting out dozens of desks on a sensible budget. It runs from a PoE switch at no more than 1.86 W, has 9 fixed function keys for hold, transfer, conference and voicemail, and keeps a 600-call log.

If the user moves large files or works in cloud systems from a PC behind the phone, the X301G keeps the same screen and two accounts with gigabit ports. The X301W is for a desk with no cable, such as a room added later: it joins the Wi-Fi and only needs a power socket.

[cta:92053492]

Fanvil X303 series: colour screen and 4 accounts

The Fanvil X303P suits sales, customer service and admin desks. Its 3 LED line keys keep the main line apart from your direct line, and the colour screen shows the caller clearly. It runs on PoE; there is no adapter in the box if you don't have a PoE switch.

The X303G adds gigabit ports and 802.3af PoE, plus management features IT teams in larger companies want: SNMP, an XML browser, multicast paging, and a backup SIP server the phone fails over to. The X303W adds dual-band Wi-Fi with 802.11ac on 5 GHz.

In an older building wired for regular phones, the X303-2 Wire runs over the existing two-wire phone cabling with a Fanvil PN8 or PN24 switch, so you move to IP phones without new network cabling.

[cta:1290279920]

Fanvil X4U: for reception, assistants and managers

The Fanvil X4U is built for whoever transfers calls all day. A 2.8-inch colour main screen handles calls, and a second 2.4-inch colour screen labels the DSS keys: 6 LED keys, up to 30 across 5 pages. Program each key for a colleague's extension to see whether they are free or busy and transfer with one press when your PBX supports BLF.

• 12 SIP accounts, so several departments' lines fit on one phone.
• Two gigabit ports with PoE and a 1,000-call log.
• A USB 2.0 port for recording calls to a flash drive and for the BT20 Bluetooth or WF20 Wi-Fi dongles. The dongles are not built in and are sold separately.
• 6-party conferencing and HD audio with Opus.

If the front desk needs more lines and keys, step up to the Fanvil X5U with 16 SIP accounts and built-in Bluetooth, or the X6U with three screens, 20 SIP accounts and up to 60 DSS keys.

[cta:1754421746]

Power: PoE or adapter?

Every model except the X301W runs on PoE, so one network cable from a PoE switch carries both power and data and no desk needs a socket. Without a PoE switch, each phone needs an adapter: 5V/0.6A for the P and G versions of the X301 and X303, 5V/1A for the W versions, and 5V/2A for the X4U. The adapter is optional and not in the box.

PBX compatibility

Fanvil phones use SIP, so they register on any IP PBX that supports it, on-premise or cloud. Fanvil's official documents list the X301 and X303 series as compatible with Yeastar P-Series, Yeastar Cloud PBX, 3CX and PortSIP. When you are fitting out dozens of desks, Auto Provisioning configures every phone from the PBX in one go instead of one by one.

4 common mistakes when buying Fanvil desk phones

1. A 10/100 phone in front of a fast PC: a PC behind an X301P or X303P is capped at 100 Mbps. If it needs more, choose the X301G or X303G.
2. Buying the X301W for a desk with a PoE switch: it does not take PoE and always needs a power socket. Where a cable is available, the X301P or X301G is the better fit.
3. Forgetting the adapter: without a PoE switch, budget one adapter per phone, as none comes in the box.
4. No DSS keys at reception: a receptionist who transfers calls needs to see colleagues' status, which is what the key screen on the X4U is for.

Buy Fanvil phones from Misbar Alhasibat

Misbar stocks the Fanvil X301 and X303 series in P, G and W versions, the X4U, X5U and X6U, and the rest of our desk IP phones. Add the PoE switches that power them over one cable and the PBX systems they register on. Browse every Fanvil product on the brand page.

Prices on the store are final and include VAT, and you can split the payment with Tabby. Not sure how to split models across your departments? Message us on WhatsApp.

Browse all desk IP phones at Misbar →

FAQ

What is the difference between the Fanvil X301P and X303P?

The X303P has a 2.4-inch colour screen, 4 SIP accounts and 3 LED line keys. The X301P has a 2.3-inch mono screen and 2 SIP accounts with no line keys. Both have 10/100 ports, PoE and 6-party conferencing.

When should I choose the X303G over the X303P?

When the PC sits behind the phone and needs more than 100 Mbps. The X303G has gigabit ports and adds SNMP and a backup SIP server.

Does the Fanvil X4U have Bluetooth?

Not built in. It supports Bluetooth through the BT20 dongle and Wi-Fi through the WF20 dongle in its USB port, both sold separately. The X5U has Bluetooth built in.

Do Fanvil phones work with Yeastar or Grandstream PBXs?

Fanvil phones work with any PBX that supports SIP. Fanvil's documents list the X301 and X303 as compatible with Yeastar P-Series, Yeastar Cloud PBX and 3CX, and they register on Grandstream UCM like any SIP phone.

Does the phone come with a power adapter?

No. The adapter is optional on these models and the phone runs straight from a PoE switch, except the X301W, which always needs a 5V/1A adapter.

Which phone should you choose?

• Large numbers of staff desks: the X301P.
• A PC behind the phone that needs gigabit: the X301G, or the X303G for 4 accounts.
• Sales and customer service: the X303P with its colour screen and line keys.
• A desk with no network cable: the X303W, or the X301W if two accounts are enough.
• Reception, assistants and managers: the X4U with its DSS key screen and 12 accounts.

The best villa intercom lets you see who is at the gate before you open it, and opens the door from your phone when you are out. Picking one comes down to three questions: how many homes or flats sit behind the gate, whether a network cable reaches the door, and whether the intercom should ring on your company PBX. This guide answers each with real numbers and matches every case to a Fanvil, Grandstream or Uniview model you can order from Misbar.

Quick pick: which intercom fits your building?

How an IP video intercom works

There are three parts. The outdoor door station holds the camera, microphone, speaker and call button. The indoor monitor shows the visitor and lets you talk, and the mobile app forwards the call to your phone. When you press unlock, the door station triggers the electric or magnetic lock wired to it.

What changes from an old audio intercom is the cabling. Each device takes one network cable from a PoE switch, and that cable carries power, audio and video, so you need no power socket at the gate. Every device in this guide supports PoE at 802.3af or higher and also accepts a 12V adapter if you have no PoE switch.

Check the protocol before you buy. Fanvil and Grandstream run on SIP, so they register on an IP PBX and ring office phones. Uniview door stations use Uniview's own protocol with Uniview indoor monitors and the Uniview app.

Fanvil VIK-01 kit: the easiest start for a villa

For a villa with a single entrance that wants everything in one order, the Fanvil VIK-01 kit pairs an i504W indoor touchscreen with an i60 door station. Fanvil says the two work together once you connect power and network.

• i504W monitor: 7-inch IPS touchscreen at 1024×600, a 2W speaker and dual-band Wi-Fi (2.4 and 5 GHz), so it can go in the living room or majlis even where no network cable reaches.
• i60 door station: 2 MP HDR camera with a 140° view, 0.1 lux with infrared, IP65 housing, and a compact 130×50×30 mm body that fits a narrow door frame.
• Ways to open the door: from the monitor, from the Fanvil Link app, over Bluetooth BLE, with a 13.56 MHz IC card, or with an inside exit button.

A lock is not included. The i60 has a relay with NC, COM and NO terminals for the electric or magnetic lock you choose. If your driver and staff need a PIN code, buy the monitor with the keypad i60K door station instead of the kit.

[cta:482208967]

A tougher door station for the villa gate: Fanvil i62 and i63

The i60 is rated IP65 with no impact rating. If your gate faces the street, the sun and the dust, or you want an aluminium face that suits a stone wall, go for the Fanvil i62: aluminium alloy housing, IP66 against dust and water jets, IK07 impact resistance, a 2 MP camera and a lit call button visitors can find at night.

Many Saudi villas house two families, parents downstairs and a married son upstairs or in the annex. The Fanvil i63 keeps the same housing and protection but adds five call buttons, so each button rings a different household and the other family is not disturbed by every visitor.

Both work with the Fanvil i504 monitor, which matches the i504W without Wi-Fi and has 8 alarm inputs for door and window sensors. For a flush finish, Fanvil's EX102 in-wall kit fits the i62, i63 and i64, with its back box set into the wall before plastering.

[cta:172771778]

Apartment building intercoms: dial the flat number

A 30-flat building cannot have a button per flat. A keypad solves it: the visitor types the flat number and only that resident's monitor rings.

• Fanvil i64: backlit keypad, aluminium housing rated IP66 and IK07, and a 2 MP camera. Visitors dial the flat number then #, and dual authentication protects sensitive doors such as stores and server rooms. Because it runs on SIP, each flat can ring a monitor, an IP phone or a PBX extension.
• Uniview OEU-301S-HMKA: 15 Braille keys and a 3.97-inch screen that guides the visitor, with up to 500 indoor monitors and 10,000 IC cards. The metal housing runs from -40 to 60°C, ships with an in-wall mounting box, and works with Uniview indoor monitors and the UNV-Link app.

For a two-family villa that prefers Uniview, the OEU-202S-HMK2 has two call buttons, IP65 and IK08 protection, a card reader for up to 10,000 cards, and support for up to 40 indoor monitors.

[cta:838236108]

Offices and compounds: Grandstream GDS3710 with the GSC3570

At an office, clinic or warehouse gate, you want the door to ring reception, staff to badge in, and the entrance to be recorded with your cameras. The Grandstream GDS3710 covers all three:

• 1080p camera with a 180° horizontal and 150° vertical view, so you see who stands beside the door, not just a face, plus WDR up to 120 dB when the sun is behind the visitor.
• 12 touch keys and a 125kHz RFID reader for up to 2,000 cards, with a card and key fob in the box.
• Two relay outputs for two locks or a lock and entrance lighting, in a metal IP66 and IK09 housing.
• ONVIF Profile S support, so your NVR records everyone who comes and goes.

Register the GDS3710 as an extension on your IP PBX and it rings desk phones, or answer it on your phone through the GS Wave app. For a guard room or reception, the GSC3570 is a 7-inch touch station with 4 SIP accounts that links up to 20 GDS37xx door stations, two doors each, so the guard opens them without leaving the desk.

If the door is in a rented office with no network cable, the GDS3727 connects over dual-band Wi-Fi 6, though it still needs a 12V adapter near the door, which is not included. It has a 4MP camera, a card reader for up to 5,000 cards and NFC. For entrances that need face recognition, the Fanvil i67 has a 7-inch touchscreen, stores up to 10,000 faces and 10,000 cards, and checks liveness against photos and masks.

[cta:1435285772]

Choosing the lock: magnetic or electric?

The intercom sends the unlock command; the lock does the work. The Uniview OEA-ML12-280 magnetic lock holds 280 kg, runs on 12V or 24V, and suits wood, glass and steel doors. It is fail-safe, meaning it releases when power is lost. That suits office doors, but think it through before fitting one on an outer villa gate.

On the relay, wire an electric lock that locks on power loss to COM and NO, and a magnetic lock to COM and NC. Give a magnetic lock its own power supply, because some door stations have a small power output, 12V / 0.25A on the OEU-202S-HMK2 for example. Browse all magnetic locks.

4 mistakes to avoid when buying a villa intercom

1. No network cable to the gate: run it before finishing works; with PoE one cable carries power and video. Too late? Choose a Wi-Fi monitor like the i504W or a Wi-Fi door station like the GDS3727.
2. Weak protection on an exposed gate: go for IP65 at minimum, and IP66 with an IK rating for a gate right on the street.
3. Mixing systems: a Uniview door station needs a Uniview monitor. Fanvil and Grandstream use SIP with their own monitors and any SIP PBX.
4. Weak Wi-Fi at the monitor: if the monitor or your phone relies on Wi-Fi, check the signal in the living room and annex first, as covered in our guide to the best access points for villas and businesses.

Buy the best villa intercom from Misbar Alhasibat

Misbar stocks villa intercom kits, IP door intercoms and indoor monitors from Fanvil, Grandstream and Uniview, together with the magnetic locks and PoE switches that complete the system. Fitting out the whole villa? Read our CCTV buying guide to choose cameras alongside the intercom.

Prices on the store are final and include VAT, and you can split the payment with Tabby. Not sure which model fits? Message us on WhatsApp.

Browse all intercoms at Misbar →

FAQ

Can I open the villa door from my phone when I am away?

Yes. The VIK-01 kit works with the Fanvil Link app, and the GDS3710 sends calls to the GS Wave app, as long as the system is connected to the internet.

Does an IP video intercom need a power socket at the gate?

No, if you connect it to an 802.3af PoE switch, the network cable powers it. It also accepts a 12V adapter if you have no PoE switch.

What is the difference between the Fanvil i60 and i62?

Both have a 2 MP camera and one call button. The i62 has an aluminium body, IP66 and IK07, while the i60 is smaller, rated IP65 with no IK rating, and is the door station inside the VIK-01 kit.

Can the intercom record to my CCTV recorder?

Yes, on ONVIF models such as the GDS3710 and Fanvil i62. Add them to an ONVIF-compatible NVR and the entrance is recorded like any camera.

Can I mix a door station from one brand with a monitor from another?

It is safest to keep both from the same brand. Uniview door stations use their own protocol with Uniview monitors, while Fanvil and Grandstream use SIP with their own monitors and with SIP PBXs.

Which intercom should you choose?

• Villa with one entrance: the Fanvil VIK-01 kit.
• Villa gate on the street: the i62 with an i504 monitor, or the i63 for two families.
• Apartment building: the keypad Fanvil i64, or the Uniview OEU-301S-HMKA for large buildings up to 500 monitors.
• Office or warehouse with a PBX: the GDS3710 at the door and the GSC3570 in the guard room or reception.

With the DSPPA amplifier series explained side by side, the differences go well beyond wattage. MP is a compact mixer amplifier for simple spaces, DMA is a larger mixer amplifier with more inputs (some models split audio across 6 zones), and DA is a power amplifier with no mixer, built for large projects. This guide walks through each series using figures from DSPPA's official data, shows how to size the power you need, and points you to the model Misbar stocks for a mosque, school or shop.

Quick comparison: DSPPA amplifier series

In short: the MP250UB suits a shop or small prayer room, the DMA250U or DMA350U suits a single-space mosque, and the DMA6350U suits a mosque or school that needs to control each area separately. If you already have a mixer or processor and need serious power, choose from the DA series, such as the DA2250.

First: mixer amplifier or power amplifier?

This is the key distinction before any numbers. A mixer amplifier is one unit that combines mic inputs, music sources, level and tone controls, and amplification. You plug in the mic, your phone and the speakers, and it works. The compact MP models and the DMA series are mixer amplifiers.

A power amplifier only amplifies. It has no mic inputs, Bluetooth or tone knobs, and takes its signal from a mixer, processor or another amplifier. The DA series works this way, and so does the 650 W MP2500, despite its MP name.

DSPPA MP vs DMA: what actually differs

Both are mixer amplifiers with 100 V output for ceiling and column speakers, and both have Bluetooth, FM radio and USB playback. The difference shows when you compare two models of the same power:

The rule of thumb: one or two mics in one simple space, go MP; it is smaller and easier. If you need mics for the imam, the muezzin and a third speaker, or want an alarm system to cut the audio, DMA is the better fit.

MP series: compact amplifiers for shops, offices and prayer rooms

The MP60UB, MP120UB and MP250UB share one design at 60, 120 and 250 W. At 1.5U they sit on a shelf or in a small cabinet. Each has two mic inputs (a 6.3 mm jack on the front and an XLR on the back), two line inputs, Bluetooth, FM radio, USB MP3 playback and an IR remote.

• Priority: the emergency input and mic 1 override music, so the background source ducks when you speak.
• Output: 70 V and 100 V for ceiling and wall speakers on long cable runs.
• Backup power: the MP120UB and MP250UB take a 24 V DC input from a battery or power supply during outages.
• Phantom power: on mic 2 only, at 48 V on the MP60UB and 24 V on the MP120UB and MP250UB.

This series covers a shop, showroom, office or small prayer room with 20 to 30 ceiling speakers.

[cta:1529180283]

DMA series without zones: one mosque, one hall

From the DMA60U to the DMA650U, Misbar stocks 60, 250, 350 and 650 W models. All are 88 mm-high mixer amplifiers with 3 mic inputs, 2 AUX inputs, Bluetooth, FM and USB, plus control inputs for a siren, mute and EMC emergency signal.

One catch on the larger models: the DMA350U and DMA650U switch between 100 V and 4 to 16 Ω outputs, with no 70 V option. The DMA350U also drops to 175 W when running on 24 V DC.

[cta:1496130121]

The 6-zone DMA models: DMA6250U, DMA6350U, DMA6500U and DMA6650U

In a large mosque or school you often want the main prayer hall louder than the women's section, or the morning assembly in the yard without disturbing classrooms. That is what zones are for. The DMA6350U and its siblings have 6 zone outputs, each with its own volume knob and indicator, plus an FN button for zone selection.

• 4 mic inputs with 48 V phantom power, switched per input.
• Remote paging: two RJ-45 ports for DMA20 paging stations, up to 6 per port, over 300 to 600 metres, so an office or guard room can page a chosen zone.
• Built-in sources: USB, SD card, FM radio and Bluetooth, with an LCD display and remote.
• Clear priority order: mute, then emergency, then siren, then mic 1, then chime, then remote paging, then other sources.
• Backup power: a 24 V DC input for power cuts.

Power options: the DMA6250U at 250 W, the DMA6350U at 350 W, the DMA6500U at 500 W and the DMA6650U at 650 W. Everything else is the same, so choose by your total speaker wattage.

[cta:1919405398]

DA series: Class-D power amplifiers for large projects

Class-D delivers high power with less heat and lower consumption than traditional designs, which is why DA models fit 2 or 4 channels into just 1U. Each channel drives its own area at 70 V or 100 V, selected by a rear switch.

• Two channels: the DA2250 at 250 W per channel and the DA2500 at 500 W per channel.
• Four channels: the DA4060 at 60 W, the DA4125 at 120 W and the DA4250 at 250 W per channel.
• Single high-power channel: the DA3650 at 750 W and the DA3850 at 1500 W on 100 V output.

The 2- and 4-channel DA models offer a balanced line input, a balanced priority input, a 100 V priority input for emergency messages and a line output to chain another amplifier. They run on 24 V DC with a 3 dB power reduction, and include thermal and short-circuit protection plus a temperature-controlled fan.

[cta:1313094209]

How to size the amplifier you need

Ceiling and column speakers in mosques and schools usually run on a 100 V line, with a transformer on each speaker that lets you pick its power, such as 3 or 6 W. That line lets you connect dozens of speakers on long cable runs without calculating ohms.

1. Add up the wattage of every speaker on the line. Example: 30 ceiling speakers × 6 W = 180 W.
2. Add 20 to 30% headroom so the amplifier isn't running flat out all the time: 180 × 1.25 = 225 W.
3. Pick the next power rating up: here the 250 W MP250UB or DMA250U is enough.
4. If speakers are spread across areas you want to control separately, size each area on its own and choose a zoned DMA or a multi-channel DA.

To choose the speakers themselves, read our guide to the best mosque speakers.

4 common mistakes when buying a DSPPA amplifier

1. Buying a power amp with no mixer: a DA unit won't take a mic directly. Without a mixer, buy an MP or DMA mixer amplifier.
2. Running at the limit: 250 W of speakers on a 250 W amplifier means it always runs at full power. Leave headroom.
3. Mixing 100 V and 8 Ω speakers on one output: each type uses a different amplifier output, and they can't share one line.
4. A large mosque on a single-zone amp: you can't turn one area down without the rest. Choose the DMA6350U or another 6-zone model.

Buy DSPPA amplifiers from Misbar Alhasibat

Misbar stocks DSPPA amplifiers across all three series: the compact MP models, DMA in single-zone and 6-zone versions with the DMA20 paging station, and DA power amplifiers with one, two or four channels. You will find every DSPPA product, including speakers, microphones and PA systems, on the brand page.

Prices on the store are final and include VAT, and you can split the payment with Tabby. Send us your speaker count, wattage per speaker and number of areas on WhatsApp and we will help you choose the right amplifier.

Browse all amplifiers at Misbar →

FAQ

What is the difference between DSPPA MP and DMA amplifiers?

Both are mixer amplifiers. MP is smaller (1.5U) with two mic inputs and up to 250 W. DMA is larger (2U) with three mic inputs and up to 650 W, and includes 6-zone models with remote paging.

Which DSPPA amplifier suits a mosque?

For a single-space mosque, the DMA250U or DMA350U depending on speaker count. For a large mosque with a women's section, courtyard and minaret, the 6-zone DMA6350U.

When do I need a DA power amplifier?

When you already have a mixer or processor and need more power or separate channels for many areas. The DA4250, for example, delivers 4 channels at 250 W each in 1U.

Will the amplifier keep working during a power cut?

The MP120UB and MP250UB, the 6-zone DMA models and the 2- and 4-channel DA models have a 24 V DC input for a battery or backup supply, though power may drop when running on it.

What about the PV series?

The PV series is not currently available at Misbar, and we found no product page or datasheet for it on DSPPA's official site. If you need a power amplifier, the DA series is the available alternative.

Which DSPPA amplifier should you choose?

• Shop, office or small prayer room: the MP120UB or MP250UB.
• Single-space mosque or hall: the DMA250U or DMA350U.
• Mosque or school with several areas: the DMA6350U with the DMA20 paging station.
• Large project with a mixer or processor: the DA2250 or DA4250.
• One area that needs very high power: the 1500 W DA3850.

The recorder collects footage from every camera, stores it, and is what you watch from on your phone. You do not pick it by price. You pick it by the cameras and cabling you have. This guide puts NVR vs DVR vs XVR side by side in one table, then matches a Uniview recorder to each case: a brand-new system, or an older coax system you want to upgrade.

NVR vs DVR vs XVR at a glance

In short: for a new installation, choose an NVR. If you already have working analog cameras on coax, choose an XVR rather than a DVR, because it takes the same cameras and adds IP channels.

What is a DVR?

A DVR records analog cameras. The camera sends its picture over coax, the recorder converts it to digital video and saves it to the hard drive, and every camera needs its own power adapter. You still find DVRs in many older shops and villas, but they cannot take IP cameras, which is why the XVR has replaced them.

What is an XVR?

An XVR is a hybrid recorder. It works with analog cameras on all four standards (AHD, TVI, CVI and CVBS) and adds channels for IP cameras, so you keep your existing cameras and cabling and add IP cameras whenever you need them.

• XVR301-04G3: records 4 analog cameras up to 5MP plus 2 IP cameras. A good fit for small villas, shops and istirahas replacing an old DVR.
• XVR301-08Q3: records 8 analog cameras up to 8MP plus 4 IP cameras (up to 12), with perimeter protection and 4 alarm inputs. Suited to schools, warehouses and compounds.

To get a sharper picture on existing coax without rewiring, swap old cameras for a modern analog model such as the UAC-B115-AF28, a 5MP bullet with a 102.2° view, built-in microphone and 20 m night vision.

[cta:1714162522]

What is an NVR?

An NVR records IP cameras only. Each camera processes its own image and sends it digitally over the network cable, which allows higher resolution. Most modern NVRs also have PoE ports, so one network cable carries both power and video and you do not need an adapter at every camera.

Uniview NVRs by camera count:

If your NVR has no PoE ports, or you have more cameras than ports, add a PoE switch such as the 16-port Uniview NSW2010-18GT2GP. Browse all NVR recorders.

[cta:1403243449]

When is it worth moving from coax to an NVR?

If your coax is old or damaged, or you want features analog cameras cannot offer, such as two-way audio and person detection inside the camera, moving to an NVR is the better choice. And if you are re-cabling anyway for a renovation or extension, run network cable instead of coax, since one cable carries both power and video with PoE.

If the cabling is sound and your current cameras are good enough, an XVR raises the resolution and puts off the cost of re-cabling, and you can add IP cameras to the same recorder later.

Which recorder should you choose?

• Working coax cameras already installed: an XVR, so you keep the cameras and add IP later.
• New system for a villa or shop with 4 cameras: the NVR301-04S3-P4 with IP cameras such as the IPC328LE-ADF28K-H dome.
• Two-storey villa with 5 to 8 cameras: the NVR301-08S3-P8 or NVR501-08B-P8.
• Warehouse or school with 16 cameras: the NVR502-16B-P16, with built-in PoE and two drive bays.

Whichever recorder you choose, fit a surveillance-rated hard drive built for recording around the clock. How long footage is kept depends on drive capacity, camera count and resolution.

Buy CCTV recorders from Misbar Alhasibat

Misbar stocks Uniview recorders in every size, together with security cameras of all types, including dome and bullet models, and PoE switches to grow the system. Starting from scratch? Read our CCTV buying guide to choose the cameras before the recorder.

Prices on the store are final and include VAT, and you can split the payment with Tabby. Not sure how many channels you need? Message us on WhatsApp.

Browse all recorders at Misbar →

FAQ

Can I connect an IP camera to a DVR?

No. A DVR works with analog cameras only. To mix both types, choose an XVR, or move fully to an NVR.

Does the recorder keep recording without internet?

Yes. Recording happens on the hard drive inside the recorder. Internet is only needed to watch from your phone away from the site.

Do I need a switch with an NVR?

Not if the recorder has enough PoE ports for your cameras, like the NVR301-04S3-P4 for 4 cameras. You need one if the recorder has no PoE or you have more cameras than ports.

Can I replace an old DVR with an XVR and keep my cameras?

In most cases, yes, because Uniview XVRs support all four analog standards: AHD, TVI, CVI and CVBS. Just check which standard your current cameras use.

How many hard drives does a recorder take?

Smaller models like the NVR301-08S3-P8 have one bay for a drive up to 10TB, while the NVR502-16B-P16 has two bays for drives up to 24TB each, so it keeps footage for longer.

FXS vs FXO in one line: an FXS port is where you plug in an analog phone or fax, and an FXO port is where you plug in the landline from STC. If your company has moved to an IP PBX but still has a landline, a fax machine or old phones in rooms, you will need one or both. This guide explains the difference with examples and shows which Grandstream or Yeastar adapter, gateway or module fits your setup.

FXS and FXO at a glance

An easy way to remember it: FXS acts like the phone socket in the wall, giving dial tone to whatever you plug in. FXO acts like the phone itself, so it needs something to give it dial tone, and that is the landline.

What you need for your setup

ATAs: FXS ports for analog phones and fax

An ATA is a small box that turns an analog phone into a PBX extension. Plug the phone or fax into the FXS port and the ATA into the network, and it registers on the PBX with a SIP account like any IP phone.

• Grandstream HT801 V2: one FXS port and a 10/100 network port. It sends fax over T.38 and falls back to G.711 automatically when the other side doesn't support it, and encrypts calls with TLS and SRTP. It runs on a 5V/1A Micro USB adapter and does not support PoE.
• HT802: the same idea with two FXS ports, for two phones or a phone plus fax.
• HT818 V2: 8 FXS ports, two gigabit network ports and a 12V/1.5A adapter. A good fit for a warehouse or older building full of analog phones.

These adapters are especially handy for fax. Many companies still receive faxes from government bodies or suppliers and don't want a separate machine on a dedicated line.

[cta:1801726387]

High-density FXS gateways: Grandstream GXW4200 for hotels and hospitals

When a building has dozens of analog phones, such as an older hotel or a hospital, you can connect them all to one gateway instead of replacing every handset. The GXW4200 series comes in four sizes: the GXW4216 with 16 ports, the GXW4224 with 24, the GXW4232 with 32 and the GXW4248 with 48.

Each port has its own SIP account, so every phone appears as a separate extension on the PBX. The gateway mounts in a 1U 19-inch rack and includes overvoltage and overcurrent protection. The GXW4216 has front RJ11 ports plus a 50-pin Telco connector, while the GXW4248 uses two Telco connectors only, so it is built to terminate on a patch or distribution panel.

Grandstream HT813: FXS and FXO in one box

The HT813 suits a small office or branch with one landline and one analog phone. The FXO port takes the STC line and presents it as a trunk on the PBX, while the FXS port connects an analog phone or fax as an extension. It also supports Lifeline on the PSTN line.

It has two 10/100 network ports (LAN and WAN) with a built-in NAT router, runs on a 12V/0.5A adapter and does not support PoE.

[cta:388913085]

FXO gateways: bringing STC landlines into an IP PBX

An FXO gateway takes your landlines and turns them into SIP trunks on the PBX, so staff make and receive calls on the same landline numbers from IP phones. The number of FXO ports matches the number of landlines, not the number of staff.

• Yeastar TA410 and TA810: 4 and 8 RJ11 FXO ports with a 10/100 LAN port. They speak SIP and IAX2 and include a firewall, IP blocklist and intrusion alerts. Yeastar lists compatibility with Asterisk, FreePBX and Lync Server.
• TA1610: 16 FXO ports on an RJ21 connector with LAN and WAN ports, for companies with many lines.
• Grandstream HT841 and HT881: 4 and 8 FXO ports plus one FXS port. During a power cut, the FXS port connects straight to the last FXO port, so one analog phone still works on the landline. They run on 802.3af PoE or a 12V adapter.

[cta:109578012]

Yeastar PBX modules: O2, S2 and SO

If you run a Yeastar P-Series or S-Series PBX, you don't need an external gateway for a few ports. The module goes inside the PBX itself:

• O2: two FXO ports for two landlines.
• S2: two FXS ports for two analog phones or a fax.
• SO: one FXS and one FXO port together.

They fit directly in the P520 and P550, in the P560 and P570 via the EX08 expansion board, in the S20 and S50, and in the S300 via the EX08. The PBX sets the limit: the P520 has two slots, so up to 4 FXS and 4 FXO ports, and the P550 has four slots, so up to 8 of each.

[cta:325672214]

Grandstream UCM6300: the ports are built in

Before buying a gateway, check your PBX. Grandstream UCM6300 models include built-in FXS and FXO ports: the UCM6301 has one of each, the UCM6302 two, the UCM6304 four and the UCM6308 eight of each with Lifeline support. With only a few landlines, the built-in ports may be all you need.

No landline? Use SIM cards instead of FXO

Many newer companies have no landline at all and use mobile numbers from STC, Mobily or Zain. In that case you don't need FXO but a SIM gateway such as the Yeastar TG400L, with 4 4G LTE ports and one SIM per port. Staff call and answer on the mobile numbers from their desk phones, and calls are spread across the SIMs.

4 common mistakes

1. Plugging a landline into an FXS port: both supply voltage, so it won't work and may damage the port. The line always goes on FXO.
2. Counting FXO ports by headcount: you need one FXO port per landline. Two landlines need two ports even with 30 staff.
3. Forgetting the power adapter: the HT801 V2 and HT813 don't support PoE, so they need a socket nearby.
4. Buying a gateway when your PBX already has ports: check the UCM6300 ports or Yeastar module slots first.

Buy VoIP gateways and ATAs from Misbar Alhasibat

Misbar stocks ATAs and FXS and FXO gateways from Grandstream and Yeastar, the O2, S2 and SO modules and EX08 board for Yeastar PBXs, 4G SIM gateways, and the PBX systems themselves. Browse Yeastar and Grandstream on their brand pages.

Prices on the store are final and include VAT, and you can split the payment with Tabby. Send us your PBX model and the number of landlines and analog phones on WhatsApp, and we will help you pick the right device.

Browse PBX systems and VoIP gateways at Misbar →

FAQ

What is the difference between FXS and FXO?

An FXS port is for analog phones and fax and supplies their dial tone. An FXO port is for the landline from the telecom provider and receives dial tone from it.

How do I connect an STC landline to an IP PBX?

Through an FXO port: built into the PBX like the UCM6302, an O2 module in a Yeastar PBX, or an external FXO gateway such as the TA410.

How do I connect a fax machine to an IP PBX?

Through an FXS port. The simplest option is the HT801 V2, which supports T.38 fax. Make sure your PBX and provider support T.38 as well.

What does Lifeline mean?

A direct connection between an FXS and an FXO port during a power cut, so one analog phone keeps working on the landline. You will find it on the HT841, HT881 and the UCM6308 ports.

Is an internal PBX module better than an external gateway?

For a few ports, a module is simpler because it sits inside the PBX with no separate power or network. For many ports, or a PBX with no free slots, an external gateway is the answer.

What to buy

• One fax or analog phone: the HT801 V2.
• Small office with a landline and an analog phone: the HT813.
• 4 landlines: the TA410, or the HT841 if you want Lifeline.
• Hotel or hospital with many analog phones: the GXW4216 to GXW4248.
• Yeastar P520 or P550 PBX: the O2 for lines and the S2 for phones.
• No landline: the TG400L SIM gateway.

Choosing the best mosque speakers starts with the space, not the wattage. A large prayer hall with a high ceiling and marble floor needs a different speaker from a women's prayer area under a drop ceiling, and the courtyard needs a third type. This guide matches every part of the mosque to a DSPPA speaker with real numbers, then shows how to pick the amplifier and microphones that complete the system.

Quick pick: which speaker for which area?

All of these run on a 70V or 100V line, so you can wire many of them to one amplifier over long cable runs without the sound dropping off.

Column speakers for large halls and high ceilings

A column speaker is tall and slim and aims sound at the rows of worshippers rather than at the ceiling, which cuts echo in wide halls with high ceilings and marble floors. The DSP255IIW is a white 30W column with a slim aluminium body that blends into light walls and a built-in 70V/100V transformer, and it works in the hall or a covered courtyard.

For smaller halls, the DSP6114W is a lighter white column at 20W, 89 dB sensitivity and 3 kg, and it still carries speech clearly to the back rows.

[cta:1187592967]

Wall speakers for pillars and side walls

Wall speakers mount on pillars and walls with a bracket angled towards worshippers, and they suit mid-size halls with standard ceilings. The DSP8064W is a white 40W wall speaker with a separate tweeter for clear speech and taps for 70V or 100V lines. For halls that need more output, the DSP8063W delivers 30W from a 5-inch woofer and reaches 105±2 dB.

[cta:1045550652]

Ceiling speakers for the women's hall and corridors

Ceiling speakers sit inside the drop ceiling out of sight and spread sound evenly from above. The DSP7011 is a frameless 6.5-inch speaker rated 10W that fits a 165 to 170 mm cutout with its included clamps, a good match for women's prayer areas, corridors and ablution rooms.

Under a high ceiling, choose the DSP8011: 94 dB sensitivity and 104 dB maximum SPL give you more level from the same amplifier power, at 10W on a 100V line or 5W on 70V.

Horn speakers for the courtyard

Horns are built for open areas and throw sound further than indoor speakers. The DSP1650 is a 50W IP66 horn with an ABS bell, a metal bracket and 6 to 50W taps on a 100V line. If voice clarity in the courtyard matters most, the DSP163HD is a two-way horn giving 25W on a 100V line across 200Hz to 15kHz.

[cta:985243419]

Amplifier and microphones: the rest of the system

100V speakers need a constant-voltage amplifier. The MP1000PIII is a 350W mixer amplifier with 3 mic inputs, 2 AUX inputs, 70V, 100V and P1 outputs, and priority for MIC1 over everything else, which suits the Friday khutbah and lessons.

To check the amplifier is big enough: add up the speaker taps you will use and leave some headroom. For example, 12 DSP7011 ceiling speakers at 10W (120W) plus 6 DSP255IIW columns at 30W (180W) come to 300W, within the 350W of the MP1000PIII.

For microphones, the CM30 is a minbar desk mic with a 455 mm tube and a metal base that needs 48V phantom power, so check your mixer provides it. For a khateeb who moves, the D7822 is a wireless kit with two lavalier mics, and for lessons and events the D5821 gives you two wireless handhelds. Browse all microphones.

[cta:115916357]

Common mistakes with mosque speakers

1. Mixing 100V and 8-ohm speakers on one output: keep each type on its own output; the MP1000PIII has both.
2. Ordinary speakers in a marble hall with a high ceiling: echo swallows speech, and column speakers reduce it.
3. Overloading the amplifier: add up the speaker taps before you buy, as in the example above.
4. A horn inside the hall: horns are for open areas; indoors they sound harsh.

Buy mosque speakers from Misbar Alhasibat

Misbar stocks a complete DSPPA mosque sound system: column, wall, ceiling and horn speakers, amplifiers, and wired and wireless microphones. Browse all audio systems to complete the setup.

Prices on the store are final and include VAT, and you can split the payment with Tabby. Want help working out speaker count and amplifier power for your mosque? Message us on WhatsApp.

Browse all speakers at Misbar →

FAQ

How many speakers can a 350W amplifier run?

It depends on each speaker's tap. For example, 12 ceiling speakers at 10W plus 6 columns at 30W add up to 300W, which runs on the MP1000PIII with headroom to spare.

What is the difference between the DSP255IIW and the DSP6114W?

Both are white column speakers. The DSP255IIW is stronger at 30W with an aluminium body, while the DSP6114W is lighter at 20W and 89 dB sensitivity, better for smaller halls.

Can I use a horn speaker inside the prayer hall?

No. Horns are designed for open areas. Inside the hall, use column, wall or ceiling speakers.

When should I choose the DSP8063W over the DSP8064W?

Pick the DSP8064W at 40W with its separate tweeter when speech clarity comes first, and the DSP8063W at 30W when you need high output, up to 105±2 dB, in a wide or crowded hall.

Does the women's prayer hall need its own amplifier?

Not necessarily. Its ceiling speakers can share the same amplifier as long as the total power stays within its rating. If you want to control their volume separately, put them on their own line.

Do 100V speakers need a special amplifier?

Yes, a constant-voltage amplifier with a 70V or 100V output such as the MP1000PIII. A standard 8-ohm home amplifier will not drive them.

The short version

Column speakers for the large hall, wall speakers for pillars and walls, ceiling speakers for the women's hall and corridors, and a horn for the courtyard. Add up the speaker power before choosing the amplifier, then finish the system with the right mic for the minbar and lessons.

Communication efficiency in modern enterprises directly depends on the quality of your telecom infrastructure. If you are searching for the best business IP phones in Saudi Arabia, selecting the right desk phone provides the ideal balance of crystal clear audio, high reliability, and cost efficiency. Misbar Al Hasabat provides the latest globally certified network phone solutions from Grandstream and Fanvil, seamlessly meeting the needs of staff, managers, and executive suites alike.

Quick Summary: Choose the Grandstream GRP2602P or Fanvil X303P if you need practical office VoIP phones for staff desks with PoE support. Opt for the Grandstream GRP2612W for built in Wi Fi connectivity, or the Fanvil X4U if your priority is multi-screen support and effortless call management.

How to Choose the Right IP Phone for Your Business

Before investing in new hardware, evaluate the requirements of each department in your organization to ensure you get the best business IP phones without paying for unused features:

• Line Capacity & Role Requirements: Receptionists and sales teams need multi line capabilities and speed-dial keys, whereas standard desk staff usually only require 2 to 3 lines.
• Power over Ethernet (PoE) Support: Reduce cable clutter on desks by powering the phone through the network cable itself, eliminating the need for standalone power adapters.
• Wireless Connectivity (Wi Fi): An excellent choice for offices lacking dedicated ethernet drops near work stations.
• Interoperability & Cloud Management: Ensure full support for standard SIP protocols and easy remote configuration, both fully supported by Misbar Al-Hasabat solutions.

Grandstream IP Phone GRP2602P: Features & Specs

An exceptional option for businesses seeking a reliable, budget friendly desk phone for employees without compromising on call quality.

• Capacity & Performance: Supports 2 lines and 2 SIP accounts, making it tailored for everyday staff use.
• Audio Technology & Powering: Features Noise Shield technology for crystal-clear audio during calls, alongside full integrated PoE support for simple deployment.
• Management & Deployment: Supports the Grandstream Device Management System (GDMS) for centralized cloud management, saving your IT team significant time and effort.

Best for: If you are looking for a dependable, entry level solution for your workforce, the IP phone GRP2602P available via Misbar Al-Hasabat delivers everything you need at a minimal operational cost.

Grandstream IP Phone GRP2612W: Features & Specs

The smart choice for modern, agile offices that require advanced connectivity features without running additional network cables.

• Display & Wireless Connectivity: Outfitted with a 2.4 inch color display and built in dual-band Wi Fi, giving you the freedom to position the phone anywhere in the office.
• Flexibility & Lines: Supports up to 4 lines and 2 SIP accounts, featuring flexible digital keys that can be customized for quick dialing or Busy Lamp Field (BLF) line monitoring.
• Enterprise Grade Security: Equipped with robust enterprise security protections, including dual encryption and digital signature authentication.

Best for: Misbar Al Hasabat provides the IP phone GRP2612W complete with local warranty options to ensure long term operational stability.

Fanvil IP Phone X303P: Features & Specs

Fanvil's IP phone X303P model delivers a smooth user experience paired with a sleek design. It combines modern features with competitive pricing, making it a standout entry on any list of the best business IP phones.

• Display & Audio Features: Features a 2.4 inch color screen that displays caller info clearly, along with HD audio quality and a noise filtering speakerphone.
• Capacity & Network: Supports 4 SIP accounts with built in 3 way audio conferencing support, plus dual ethernet ports with PoE support.
• Compatibility: Fully compatible with major IP PBX systems and cloud platforms.

Best for: Order the Fanvil IP phone X303P directly through Misbar Al Hasabat to enhance staff productivity with modern design and trusted performance.

Fanvil IP Phone X4U: Features & Specs

Purpose built for executives, receptionists, and sales teams handling heavy call volumes daily who need rapid access to internal extensions.

• Dual Displays: The flagship feature of the IP phone X4U is its dual color screens: a 2.8 inch primary display and a secondary 2.4 inch side screen dedicated to smart DSS keys.
• Smart Keys & Speed: Offers up to 30 programmable DSS keys for monitoring team extensions or one touch speed dialing. Supports Bluetooth and Wi-Fi expansion via external dongles.
• Gigabit Network Speed: Dual Gigabit Ethernet ports ensure network passthrough speeds to connected PCs remain lightning-fast, supported by the Opus HD audio codec.

Best for: Misbar Al Hasabat offers the high performance Fanvil IP phone X4U to streamline call routing and extension management effortlessly.

Which IP Phone Fits Your Business in 2027?

If you are debating which model to choose when sourcing the best business IP phones for your company, use this straightforward guide:

Choose the Fanvil IP Phone X4U or Grandstream IP Phone GRP2612W if:

• You need color screens, native Wi-Fi support, or numerous speed dial keys for receptionists and management.
• You want to speed up call transfers and monitor employee availability at a single click.

Choose the Grandstream IP Phone GRP2602P or Fanvil IP Phone X303P if:

• You are outfitting a new office for a large team and want the best price to performance ratio.
• You need practical, PoE-powered IP phones in Saudi Arabia that offer clear audio and steady daily performance.

Need assistance? Consult the experts at Misbar Al Hasabat to help match these models to your current IP PBX setup or help you choose a compatible new system.

Buy IP Phones from Misbar Al-Hasabat

Misbar Al Hasabat supplies premium IP phones from top brands like Grandstream and Fanvil, including the IP phone GRP2602P, IP phone GRP2612W, IP phone X303P, and IP phone X4U, to cover all corporate communications needs. Select the right models based on your headcount, network setup, and functional requirements, and request a custom quote whether outfitting a single office or multiple branches.

Planning a bulk purchase or deploying an end to end communication system? Contact Misbar AlHasabat today with your required phone count and existing PBX setup to receive a tailored commercial offer. Be sure to ask about warranty details, delivery options, and flexible payment methods when ordering.

Frequently Asked Questions

What is the best IP phone for small businesses?

The best choice depends on your specific setup. The GRP2602P is ideal for desks requiring basic calling capabilities with PoE connectivity, while the GRP2612W offers built-in Wi-Fi for spaces where network cabling is limited.

What is the difference between the GRP2602P and GRP2612W?

While both are reliable business IP phones, the GRP2602P focuses on essential wired office desktop use via PoE. The GRP2612W adds built-in dual-band Wi-Fi support and 4-line multi functionality for greater deployment flexibility.

Can an IP phone work without a PBX system?

Yes, depending on your setup. Certain IP phones can register directly with a cloud SIP service provider. However, enterprise environments typically require a local IP PBX or cloud communications platform to handle extensions, call transfers, and internal routing efficiently.

Can IP phones be powered via PoE?

Yes, provided the phone model supports Power over Ethernet (PoE) and your network switch or router supplies PoE power. Always check hardware specifications prior to purchasing to avoid needing additional power adapters.

How do I choose the right IP phone for my company?

Assess the number of users and required SIP accounts, then compare audio quality, screen size, network options (Wi Fi vs. Ethernet/PoE), and essential features. You can contact Misbar Al Hasabat anytime to discuss available options and get a custom quote for your organization.